HOME > Charger > Lead-Acid Charger >


 Item Code Rating Current
Wattage Voltage
AFP36V090A 9A 397W AC100~120V
AFP36V110A 11A 485W
AFP36V150A 15A 648W
AFP36V330A 33A 1470W

Brand  :      N/A


1. Short-circuit Protection: Charger O/P cut-off automatically when short circuit
2. Overload Protection: Charger O/P current-limited automatically when overload.
3. Reverse Polarity Protection: Charger O/P cut-off automatically when battery
reverse connection.
4. Automatic multi-rate charging function: Equalizer charge, floating charge and
option for pulse charge and pre-charge 
5. Unique LCD (or digitalt meter) Display: Indicating both charger status and
battery level (or voltage, current, capacity, timer and charging time)
6. 3 LED Display: Red(power), green(floating charge) & orange(equalizer charge)
7. Dual O/P Bank: Charger can charge two bateries at the same time(Option)

Charging Curve and LED indications


Item Code AFP36V090A AFP36V110A AFP36V150A AFP36V330A
Equalizer Charge 44.1V+/-0.3V
Float Charge 41.1V+/-0.3V
Current (+/-5%) 9A 11A 15A 33A
Wattage 397W 485W 648W 1470W
Efficiency > 85% (at full load)
Voltage AC100~120V OR AC200~240V
Frequency 47~63Hz
Battery Reverse YES,by Fuse Burnt
Short Circuit YES
Overload YES
Cooling Fan Speed Controlled by Charging Stage
Function SW
Pulse Charge Enable pulse charge function instead of float charge
Constant Limited O/P current to 50% of rating current
Display Selection Option for AFPxxVxxxAD only
Dimensions(mm) 152*70*225 152*70*275 323*231*106 350*230*210
Net Weight 2.1kg 2.4kg 4.2kg 8.5kg
1. Other charging voltage model is available upon receiving request.
2. LCD display and Digital meter can be choosed, but a different price.
 DC Output Connecting Wire Index
Connecting Wire
(Black & Red)
 Fit Item Code Standard Accesory
18AWG/1.2M AFP12V020A AFP240120A YES
16AWG/1.2M AFP12V060A AFP12V100A AFP24V040A
14AWG/1.2M AFP240120A AFP24V140A AFP36V090A
AFP36V110A AFP48V070A AFP48V080A
12AWG/1.2M AFP12V200A AFP12V250A AFP24V170A YES
AFP36V150A AFP48V110A NO
10AWG/1.2M AFP12V300A YES
AFP24V230A AFP48V250A NO
8AWG/1.2M AFP12V450A AFP24V450A AFP24V500A
4AWG/1.2M AFP12V900A AFP12V1000A NO

Connecting Terminal Choices
1 2 3 4 5 6
Remark: Connecting Wire and Terminal are available upon receiving customer's request.

1. Connect the charger system to an earthed socket-outlet strongly.
2. Connect the alligator clips to battery terminals (red clip--->positive terminal;
black clip--->negative terminal)
3. Turn on the power switch which is located on the front panel of charger, then
the red LED lits and bi-color LED will confirm the charger's stage. And also the
LCD display (or digital meter) will confirm the charger's stage & battery level
(or charger's O/P voltage).

1. ABC-Series was designed for charging Lead-Acid batteries only.
2. Against re-charging non-rechargable batteries.
3. If the supply cord is damaged, it must be replaced by a special cord or assembly
available from the manufacturer or its service agent.
4. Always place the charger in well ventiated and dry environments.
5. The battery maybe damaged if charging status LED cannot change to green
after long time charge.
6. The battery charger was designed by aluminum housing as itself heat sink,
avoid touching the case for safety purpose because the temperature is about 50
degree C on the case when charging

Inquiry Details

If you have any questions relating to any of our products or serivces,pls feel free to contact us. A sales Representitive will get back to you in 8 hours.

Name Email TEL Country Subject: Messages VCode : unclear? click pic to changeAuthCode.